an Ethernet to WiFi gateway, and more. Waveshare sells the board itself, but also various kits with a speaker, a 7-inch touchscreen display, or a 10-inch touchscreen display. ESP32-P4-Module Basic Kit ...

Seth has both a DIY kit and a pre-made kit available on his ... Start by adding the sensor into your home Wifi network. Once connected, it can be added to your Home Assistant setup via ESPHome.

Seeed Studio IoT Button is an inexpensive ESP32-C6 button powered by a rechargeable 18650 battery and designed to easily and quickly control Smart Home ...

This 3-piece Orbi mesh setup covers up to 7,500 sq. ft., supports 100 devices, and now costs $400 less than usual.

(See the README.md file in the upper level 'examples' directory for more information about examples.) Install Ethernet driver Attach the driver to esp_netif Send DHCP requests and wait for a DHCP ...

A generic firmware for an ESP32 to be used as a Modbus TCP/IP gateway for any modbus RTU device. Default RX/TX pins for the TTL-RS485 communication are used from hardware-serial2 (check pinout of your ...